Download Cisco CallManager Express CCME GUI Administration Installation Files

Article Reads:173580

Most engineers are aware that to download and install the latest Cisco CallManager Express (CCME) Graphical User Interface (GUI) files, Cisco requires a registered CCO account with the necessary privileges. To help alleviate engineers and administrators from locating and downloading these files, we are now providing them free via direct download from Firewall.cx - no registration required!

We've conveniently packed in one zip file CallManager Express GUI files for CCME v3.3, CCME v4.1.0.2, CCME v4.2, CCME v7.1.0.1, CCME v8, CCME v8.5 and CCME v8.6.

Please note that CCME GUI v8.8 and v9.0 contain bugs and are pretty much useless as no CCME modifications can be saved using these GUI versions, and therefore you are advised to use CCME v8.6 if the GUI interface is absolutely necessary. For more information on these bugs, please visit our CCME v8.8 & v9.0 bug announcement. CCME GUI version 9.1 was not yet published at the time of this post.

Users can download CCME GUI files by visiting our Cisco Download section.

Step-by-step installation instructions for the CCME GUI are available at the following Firewall.cx articles:

1) CallManager Express GUI Software Installation & Configuration - Part 1
2) CallManager Express GUI Software Installation & Configuration - Part 2

Users who wish to check their IOS CCME version can use the show telephony-service command:

R1# show telephony-service
CONFIG (Version=8.6)
=====================
Version 8.6
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
protocol mode default
ip source-address 10.0.0.1 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
load 7945 SCCP45.9-1-1SR1S
max-ephones 30
max-dn 100
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
privacy
no privacy-on-hold
hunt-group report delay 1 hours
Number of hunt-group configured: 1
hunt-group logout DND
max-redirect 10
voicemail 88
cnf-file location: flash:
cnf-file option: PER-PHONE
network-locale[0] U1   (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US    (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
phone service videoCapability 1
moh flash:north-gate.wav
time-format 24
date-format dd-mm-yy
timezone 24 GTB Standard/Daylight Time
url services http://10.0.0.10/
transfer-pattern 6.
transfer-pattern 41
after-hours pstn-prefix 4 4
night-service code *1234
keepalive 30 auxiliary 30
timeout interdigit 4
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message Firewall.cx
web admin system name admin secret 5 $1$QuGK$tLHc4.7jdhWlzp9S9KHjC.
edit DN through Web: enabled.
edit TIME through web: enabled.
background save interval 10 minutes
Log (table parameters):
     max-size: 150
     retain-timer: 15
create cnf-files version-stamp 7960 May 12 2011 22:29:16
transfer-system full-consult
transfer-digit-collect new-call
multicast moh 239.10.16.4 port 2000
auto assign 1 to 100
auto assign 1 to 15
local directory service: enabled.
Extension-assigner tag-type ephone-tag.

The table below illustrates the Cisco IOS releases, CallManager Express versioning and CallManager Express GUI version that should be used or installed on the device (router or UC500):

Cisco IOS Release	Cisco Unified CME Version	Cisco Unified CME GUI Version	Specifications Link
15.2(2)T	9.0	9.0.0.0 Buggy	CME 9.0 Link
15.1(4)T	8.6	8.6.0.0	CME 8.6 Link
15.1(3)T	8.5	8.5.0.0	CME 8.5 Link
15.1(2)T	8.1	8.1.0.0	CME 8.1 Link
15.1(1)T	8.0	8.0.0.0	CME 8.0 Link
15.0(1) XA	8.0	8.0.0.0	CME 8.0 Link
15.0(1) M	7.1	7.1.1.0	CME 7.1 Link
12.4(24)T	7.1	7.1.0.0	CME 7.1 Link
12.4(22)T	7.0(1)	7.0.0.1	CME 7.0 Link
12.4(20)T	7.0	7.0.0.0	CME 7.0 Link
12.4(15)XZ	4.3	4.3.0.0	CME 4.3 Link
12.4(11)XW9	4.2	4.2.0.4	CME 4.2 Link
12.4(15)T	4.1	4.1.0.2	CME 4.1 Link
12.4(11)T	4.0(2)	4.0.3.1	CME 4.0(2) Link
12.4(9)T	4.0(0)	4.0.0.1	CME 4.0 Link
12.4(6)T	3.4	3.4.0.1	CME 3.4 Link