Skip to main content

HowTo: Basic ASA 5505 configuration

More
14 years 8 months ago #32100 by ZiPPy
I agree with Alans, this should go in the Cisco Knowledge Base. It's a really good step-by-step tutorial for the ASA5505. I've seen many, many posts on setting up the ASA5505 from scratch.

What do you think moderators?


Cheers,

ZiPPy

ZiPPy
More
14 years 8 months ago #32177 by imktz
Please I have a problem with cisco asa 5510, is this set-up works for this one too?
More
14 years 8 months ago #32227 by Duffy
Replied by Duffy on topic Fixed IP on ASA 5505
Good step by step, however you glossed over the part I need. I want to have a fixed IP on the outside. If I have it set to DHCP everything is fine but when I switch to a fixed IP I can no longer get out of the firewall. I am assuming it is a DNS or Routing problem but I can't figure out what to fix.

I am new to firewalls and everything I know I learned by trial and error.

Thanks in advance for any help.
More
14 years 8 months ago #32228 by r0nni3
have you added a static route ? did you use the correct subnet ?

Currently working as Cisco Engineer at Neon-Networking.

Certifications:
CCNA - Have it
CCNA Security - Have it
CCSP - Almost!!!!
CCIE Security - Not so far away dream
More
14 years 8 months ago #32229 by Duffy
After re-reading this a couple of times I saw what I needed and was able to solve my problem.

Thanks
More
14 years 8 months ago #32231 by r0nni3

Please I have a problem with cisco asa 5510, is this set-up works for this one too?


yes it would but you just have to change the VLAN configuration to interfaces.

Currently working as Cisco Engineer at Neon-Networking.

Certifications:
CCNA - Have it
CCNA Security - Have it
CCSP - Almost!!!!
CCIE Security - Not so far away dream
Time to create page: 0.129 seconds