Crossover between two routers

Ok so I know there is a way to connect 2 routers directly, from serial to serial using a DCE/DTE DB60 Crossover Cable

BUT...!!! is there any other way to do this? I mainly ask because I have a few WIC -1DSU- T1 DSU/CSU CARDs and i was hoping you could use a crossover cable between them in the same way...

Any suggestions?

YOu can use a crossover T1 cable to connect them. Make your own cable:

1 <--> 4
2 <--> 5
4 <--> 1
5 <--> 2

Ok so I know there is a way to connect 2 routers directly, from serial to serial using a DCE/DTE DB60 Crossover Cable

BUT...!!! is there any other way to do this? I mainly ask because I have a few WIC -1DSU- T1 DSU/CSU CARDs and i was hoping you could use a crossover cable between them in the same way...

Any suggestions?

This is awsome.. almost every router I find on Ebay comes with a 1DSU- T1 DSU/CSU. So they're not going to be wasted.