- Posts: 2
- Thank you received: 0
ASA 5505 L2TP
14 years 4 months ago #34692
by gizme
ASA 5505 L2TP was created by gizme
Hi Folks,
I was wondering if there is anyone who could help me with a issue iam having with the ASA 5505 and L2TP VPN.
Its a very simple setup 1 external ip and then one internal network.
The issue iam having that when seting the VPN subnet to 10.10.0.0 i cannot access anything on the internal lan however changing the vpn address to the sam as the local lan and changing the nessecary rules all works fine.
Config can be found here: pastebin.com/hJSxbYZv
Any help will be appreciated
I was wondering if there is anyone who could help me with a issue iam having with the ASA 5505 and L2TP VPN.
Its a very simple setup 1 external ip and then one internal network.
The issue iam having that when seting the VPN subnet to 10.10.0.0 i cannot access anything on the internal lan however changing the vpn address to the sam as the local lan and changing the nessecary rules all works fine.
Config can be found here: pastebin.com/hJSxbYZv
Any help will be appreciated
- skepticals
- Offline
- Elite Member
Less
More
- Posts: 783
- Thank you received: 0
14 years 4 months ago #34700
by skepticals
Replied by skepticals on topic Re: ASA 5505 L2TP
I don't see the VPN subnet listed in the No-nat access list.
What exactly is your problem? A user connects to the VPN and can't access anything on the LAN?
What exactly is your problem? A user connects to the VPN and can't access anything on the LAN?
14 years 4 months ago #34704
by gizme
Replied by gizme on topic Re: ASA 5505 L2TP
Yes exactly, i cannot reach anything on the lan side.
- skepticals
- Offline
- Elite Member
Less
More
- Posts: 783
- Thank you received: 0
14 years 4 months ago #34715
by skepticals
Replied by skepticals on topic Re: ASA 5505 L2TP
You need to have the networks in the no-nat acl or they will get nat'd on the outside interface.
Time to create page: 0.119 seconds