CSM-S Active / Standby sync

Hello


I have two 6509 switches loaded with FWSM (Bridged mode) and CSM-S. One is active and other one as standby. I have configured HSRP on vlan interface to decide active standby and Firewall priority is configured accordingly to make active and standby.


The SSL module in active switch is accessible from inside network as well as from DR 6509 switch. But the SSL module in DR switch is not accessible though they are in same VLAN as primary one.

I am not sure whether we can have CSM in this way or am I doing anything wrong?

any suggestions or advices are much appriciated.

Thanks
Dove.