Hot Downloads



The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Sonicwall Tele3 site to site VPN

Sonicwall Tele3 site to site VPN 14 years 10 months ago #6640

Hi all

I have setup a site to site VPN using a TZ 170 and a Tele3 sonicwall. The Site to Site is running in aggressive mode becuse the network that has the TELE3 is running a cable modem and is a DHCP client. The site to site is up and running, but now i have to connect a Linksys wireless router to the TELE 3 so users in the house can use wireless access. The Linksys is a WRT54G, and it is running in NAT mode.

I want to know if i am on the right track here with my thought process on this.

I will uplink the linksys to the TELE3, give the linksys a static WAN ip address i.e that is in the same range as the TELE3's LAN interface, and subnet mask. Then assign a static ip address to the linksys LAN interface i.e /24. Turn off all NAT on the linksys, so that i am not doing any double NATING. If wireless laptops can get an ip from the linksys DHCP, and if DNS is setup correctly i should be able to get out to the net?

thanks for any help


vpn 14 years 10 months ago #6673

It sounds feasible as long as your routing is right. For example, the Linksys will need to have its default gateway set as the address of the Tele3. And the Tele3 will need some sort of static route entry to tell it there is another network behind the Linksys
  • Page:
  • 1
Time to create page: 0.100 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup