Skip to main content

WARNING: Cisco Lab VTY/Console & Enable Passwords !!!

More
17 years 1 week ago #20380 by Chris
It seems like some people are more keen on creating problems rather than educating themselves.

Unfortunately, we've had at least two users who decided they don't need to follow our guidelines, and use different, from those indicated, 'enable' passwords on our first lab's router.

The result of this action was to block our automated reset system from obtaining access to the router and resetting it for the next user.

We really hate to enforce rules like we've done in the past and therefore kindly ask that you follow a few simple guidelines provided, to help everyone get a chance to work on the equipment.

Users caught abusing the system (excessive booking schedules or performing actions they shouldn't e.g deleting IOS's, using different passwords than those indicated) will be deleted from the Cisco lab system and our site.

Let's hope these incidents won't occur again!

Thank you.

Chris Partsenidis.
Founder & Editor-in-Chief
www.Firewall.cx
More
17 years 1 week ago #20382 by ashok_nitc
thanks chris... good decission.
i think for booking you need to impliment some rule so that maximum no of people get access to the lab!!!
More
17 years 5 days ago #20434 by cciesec2007
Hello Chris/Firewall.cx Guys,
When it was my time for the lab, the password "cisco" was not taking. Just to let you know.
Rgds,
-arif

www.ciscojournal.com (coming soon)
More
17 years 21 hours ago #20522 by redduck666
from my understanding of first post and docs the password is supposed to be ''cisco''?

[code:1]marvin 13:25:52 ~ $ telnet ciscolab.no-ip.org 2002
Trying 193.92.234.221...
Connected to ciscolab.no-ip.org.
Escape character is '^]'.


|-_-_-_-_-_-_- Firewall.cx Cisco Lab -_-_-_-_-_-_-|
| |
| All traffic is monitored |
| Do not abuse this free service |
| |
| Please hit 'Return' and wait |
| to receive the prompt |
| |
| Report any problems to feedback@Firewall.cx |
|- - - - - - - - - - - - - - - - - - - - - - - - -|


This cisco free lab for those who are desprate to get CCNA lab practicle.

User Access Verification

Password:
Password:
[/code:1]

password ''cisco'' doesn't let me login :/
More
17 years 21 hours ago #20524 by Chris
redduck666,

When first login in to the lab equipment, you shouldn't need to enter any password! If the router or switch requests a password, its because the previous user didn't bother following our guidelines and as a result, our system was unable to reset the device's configuration.

When this happens, need to manually perform a password recovery procedure so you can access the equipment.

We are looking into a solution for these 'problematic' situations.

Cheers,

Chris Partsenidis.
Founder & Editor-in-Chief
www.Firewall.cx
More
16 years 11 months ago #21016 by alpe
Replied by alpe on topic Can't login into the router
I can't login into the router. I get the following:

|-_-_-_-_-_-_- Firewall.cx Cisco Lab -_-_-_-_-_-_-|
| |
| All traffic is monitored |
| Do not abuse this free service |
| |
| Please hit 'Return' and wait |
| to receive the prompt |
| |
| Report any problems to feedback@Firewall.cx |
|- - - - - - - - - - - - - - - - - - - - - - - - -|


*Mar 2 10:30:38.399: %IP_SNMP-3-SOCKET: can't open UDP socket
*Mar 2 10:30:38.403: Unable to open socket on port 161
*Mar 2 10:31:37.923: %IP_SNMP-3-SOCKET: can't open UDP socket
*Mar 2 10:31:37.927: Unable to open socket on port 161
exit>
exit>
Time to create page: 0.151 seconds