Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Roaming

Re: Roaming 13 years 2 weeks ago #21792

  • facer
  • facer's Avatar Topic Author
  • Offline
  • Frequent Member
  • Frequent Member
  • Posts: 31
  • Thank you received: 0
I have tested it and it works! Thank you very much for your replies.

Do the channels have to be only 1 6 and 11? Or can i use others? (our access points list 1 - 13 and overlap quite a bit)

Re: Roaming 13 years 2 weeks ago #21797

Great! I'm glad it is working. Having the correct channels will give the best performance.

Using channels: 1, 6, and 11 do not overlap at all.

If you have a great deal of APs, you could use 1, 4, 7, and 11.

Are your APs on multiple floors? If so, remember that the signal is in 3D, so you don't want to put the same channel on top of each other.

Take a look at this link: technet2.microsoft.com/windowsserver/en/...4f1033.mspx?mfr=true

Re: Roaming 13 years 2 weeks ago #21819

  • facer
  • facer's Avatar Topic Author
  • Offline
  • Frequent Member
  • Frequent Member
  • Posts: 31
  • Thank you received: 0
I have it all up any running now, the staff are very happy.
Thanks very much for all your information, i feel a little stupid now as i didn't realise it could be so easy!

Thanks again 8)

Re: Roaming 13 years 2 weeks ago #21823

Great! I'm glad it is working. It's always a better day when staff are happy :-)

No need to feel stupid; you just didn't know. I wasn't 100% positive it was going to work either without knowing the specifics. There are too many concepts in IT to know everything. As long as you can seek the information and use it you should be fine.

Let me know if there are any other issues.

By the way, are you still using the Windows Zero Config? If so, is it switching between the APs automatically?

Re: Roaming 13 years 2 weeks ago #21832

  • facer
  • facer's Avatar Topic Author
  • Offline
  • Frequent Member
  • Frequent Member
  • Posts: 31
  • Thank you received: 0
Lol, it certainly is!

Yes i am still using Windows Zero Config and it seems to be handeling it ok.

I'm sure i will be back when i get some more problems!

Cheers 8)

Re: Roaming 13 years 2 weeks ago #21833

Sounds good. In that case, I hope not to see you. That way I know you have not had any additional problems.
  • Page:
  • 1
  • 2
Time to create page: 0.112 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup