Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: 2 networks and 3 routers do i got it right ?

2 networks and 3 routers do i got it right ? 12 years 2 months ago #15690

  • Brandonh
  • Brandonh's Avatar Topic Author
  • Offline
  • Distinguished Member
  • Distinguished Member
  • Posts: 81
  • Thank you received: 0
I have dsl internet with 3 dsl/cable routers and im wanting to create two networks but allow them to comunicate between the two and provide them each internet access. Im thinking of making the first router 192.168.1.1 255.255.255.0 and the second and third routers will recieve dhcp and internet from the first router. Now im thinking if i make the second and third routers wan IP's 192.168.1.2 and 192.168.1.3 both 255.255.255.0 then make Lan IP's 192.168.2.1 and 192.168.3.1 with 255.255.0.0 then make the clients on the two networks 192.168.2.2-100 and 192.168.3.2-100 with 255.255.255.0. the only thing i worry about is that if the router's lan side Ip has a subnet mask of 255.255.0.0 it will try and send packets to 192.168.1.1 without going through its 192.168.1.2 or 192.168.1.3 gateway. Does anyone have any ideas

Re: 2 networks and 3 routers do i got it right ? 12 years 1 month ago #15868

Whats type of routers do you got?
The Bublitz
Systems Admin
Hospice of the Red River Valley

Re: 2 networks and 3 routers do i got it right ? 12 years 1 month ago #15913

  • Brandonh
  • Brandonh's Avatar Topic Author
  • Offline
  • Distinguished Member
  • Distinguished Member
  • Posts: 81
  • Thank you received: 0
I have a linksys and 2 dynex routers they are not fancy routers
  • Page:
  • 1
Time to create page: 0.124 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup