Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Network seperation

Network seperation 10 years 2 months ago #15592

  • Dutchman
  • Dutchman's Avatar
  • Offline
  • New Member
  • Posts: 6
  • Karma: 0
G'day guys,

We have 2 seperate networks and want to run them over one microwave shot. We seem to have problems getting it working. The connections are made properly, and lets say RouterA1 connects to a taclane(KG175 encrytion), then to RouterB1 then over the microwave over to RouterB2 which has another taclane on to RouterA2. We are playing around with accesslists and 'ip route' trying to get things going, as we need to keep them seperate. From the RouterA1 it goes into taclane (has an ip address), and then to RouterB1. Now thru the microwave, (also has an ip address). On the other end the same, microwave to RouterB2, to taclane, to RouterA2. What are all the 'ingredients' to make this work?
And how do we go about protocols which are different on both networks?
The administrator has disabled public write access.

Network Seperation 10 years 2 months ago #15651

  • Dutchman
  • Dutchman's Avatar
  • Offline
  • New Member
  • Posts: 6
  • Karma: 0
Finally got it up. We created a tunnel from RouterB1 to RouterB2 and had no need for anthing else once the kg175 was correctly setup. One of the accesslists let the different ip addresses thru. Now we find that this sucks up a lot of bandwidth of the microwave shot slowing things down drastically, another day goes by......
The administrator has disabled public write access.
Time to create page: 0.071 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup