Skip to main content

Need help for my packet tracer ~

More
13 years 1 month ago #36367 by JYghost
www.2shared.com/file/nLJcu--K/Case_Study_vlan.html

I cant ping the host and the router. And what ip add should i put for my vlan ? Please help me ! ):
More
13 years 1 month ago #36371 by Nevins
[img




Which host and which router are you trying to get to communicate?

Useful Threads
================================
www.firewall.cx/forum/2-basic-concepts/3...e-resource-page.html
More
13 years 1 month ago #36373 by JYghost
i'm trying to make the three routers able to communicate to all hosts . is that possible ?
More
13 years 1 month ago #36380 by S0lo
I had a look at it. Here are some points that you need to consider.

1. Since your using VLANs every where, you need to define sub-interface on the FastEthernet ports of all routers.

2. The switch ports connected to those router ports should also be set to trunk mode.

3. Some PCs are not using the correct subnet mask and gateway.

4. The switches are all on VTP server mode. Only one switch per switching segment should be set to server mode, the rest should be client mode. Still, if you don't do this one, the network will work. but it's not practical to all on server mode since you need to update all switched manually for VLAN changes.

I fixed only the LEFT side of the network, the side behind the "Jurong Industrial" Router. Those PCs on the left can now ping each other. I'll leave the rest to you ;). Here is the half-fixed file:

www.2shared.com/file/HkRhNpG5/Case_Study_vlan_half_fixed.html

Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
More
13 years 1 month ago #36382 by JYghost
is there other link to download the file ?? sry i cant download it ..
More
13 years 1 month ago #36383 by S0lo
Here it is with a different host:

www.sendspace.com/file/h5ngdm

Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
Time to create page: 0.153 seconds