Hot Downloads

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: DAT Drive in Server 2000 Problem

DAT Drive in Server 2000 Problem 13 years 3 months ago #7452

  • TheBishop
  • TheBishop's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Posts: 1719
  • Karma: 5
  • Thank you received: 8
This one stinks. I built a W2000 server and stuck in an HP SureStore DAT drive that we had lying around. The drive is recognised and checks out ok but refuses to do anything with the tapes - the symptoms are explained in MS Knowlegebase article 269600. The fix described there is to upgrade to the latest service pack, the problem is fixed in SP2 and later. Unfortunately my server is already at SP4. Or there's a workaround to use the /maxmem switch to reduce the amount of memory available to the server. I don't really want to do that!
Anybody else seen this problem and managed to fix it by any other means than hurling the server through the nearest window?

Please Log in to join the conversation.

Re: DAT Drive in Server 2000 Problem 13 years 3 months ago #7495

Have you tried updating the Firmware? This might help the situation.

Please Log in to join the conversation.

Firmware 13 years 3 months ago #7542

  • TheBishop
  • TheBishop's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Posts: 1719
  • Karma: 5
  • Thank you received: 8
Didn't know you could update the firmware in those. I'll look into it

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.123 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup