Hot Downloads

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Windows 2000 Router

Windows 2000 Router 13 years 3 months ago #329

  • TheKid
  • TheKid's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
Dear friends,

I am trying to route between 192.168 network and 172.20.1 network, using Windows 2000's Netwok Router facility. Since it is never woking after doing many double checks against books and web sites that give step by step instuction, I have 2 simple doubt in my mind for you to clarify.

1. Can windows 2000 router act as a router between 2 IP classes?

2. If yes, (probably): what are the protocols or the configurations itself?

Regards
The administrator has disabled public write access.

Windows 2000 Router 13 years 3 months ago #330

  • Chris
  • Chris's Avatar
  • Offline
  • Administrator
  • Posts: 1446
  • Thank you received: 13
  • Karma: 8
Windows 2000 server can act as a router without doubt. It might be a bit tricky to get it working the way you would like, but it is possible.

The fact your having problems routing from one network to another is surely because of your routing table.

If you have a chance to setup your network again and use the tools provided to create route entries, you can test it and if it dosent work again, then check the routing table, which will give you a good idea what has gone wrong.

You could also post the result here so we can see them and help you deal with the problem.

Cheers,
Chris Partsenidis.
Founder & Editor-in-Chief
www.Firewall.cx
The administrator has disabled public write access.

Windows 2000 Router 13 years 3 months ago #331

  • jackeen
  • jackeen's Avatar
  • Offline
  • Frequent Member
  • Posts: 37
  • Karma: 0
hi all

i recently came across this website that is all about windows (and its not microsoft either)

very good tutorials and diagrams for setting up services on all windows platforms

it might be able to sort out the problem your having.
www.wown.com
The administrator has disabled public write access.

Windows 2000 Router 13 years 3 months ago #332

  • tfs
  • tfs's Avatar
  • Offline
  • Expert Member
  • Posts: 521
  • Karma: 0
I have used WinNT as a router, but not Win2K. Do you have to use 2000 Server or can you do it with Win2K Professional?

Thanks,
Tom
Thanks,

Tom
The administrator has disabled public write access.

Windows 2000 Router 13 years 3 months ago #333

  • Chris
  • Chris's Avatar
  • Offline
  • Administrator
  • Posts: 1446
  • Thank you received: 13
  • Karma: 8
I've never used Win2k Professional as a router, but considering the fact you can have it acting as a router for dialin connections .. Im sure its possible, but might be limited in some ways.
Chris Partsenidis.
Founder & Editor-in-Chief
www.Firewall.cx
The administrator has disabled public write access.

Windows 2000 Router 13 years 3 months ago #334

  • jackeen
  • jackeen's Avatar
  • Offline
  • Frequent Member
  • Posts: 37
  • Karma: 0
as chris said it is possible use win2k as a router, it is achieved by editing the registry

Enabling IP Routing

By default, IP routing is disabled. To enable IP routing, you must allow the computer to
forward IP packets it receives. This requires a change to the Windows 2000 system registry.
When you enable the Routing and Remote Access service for IP routing,
this registry entry is made automatically.

To enable IP routing

1 .From the Start menu, click Run.

2.Type regedt32.exe or regedit.exe, and then click OK.

3.In a registry editor, navigate to
HKEY_LOCAL_MACHINE SYSTEMCurrentControlSetServicesTcpip Parameters

4. Select the "IPEnableRouter" entry (by defining as value : 1 ) :

once agin i have also never used this so as chris said it may be limited
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.090 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup