Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: AP needs to restart every morning

AP needs to restart every morning 7 years 8 months ago #29744

  • Tomic
  • Tomic's Avatar
  • Offline
  • New Member
  • Posts: 7
  • Karma: 0
Hey alle, i have 17 ap1131ag, but one of them needs to restart every morning.

i get this log
12 Mar 1 00:00:11.862 Notification Line protocol on Interface Dot11Radio0, changed state to down
13 Mar 1 00:00:11.862 Notification Line protocol on Interface Dot11Radio1, changed state to down
14 Mar 1 00:00:11.764 Notification Line protocol on Interface BVI1, changed state to up
15 Mar 1 00:00:11.510 Notification Line protocol on Interface FastEthernet0, changed state to up
16 Mar 1 00:00:10.862 Notification Interface Dot11Radio0, changed state to reset
17 Mar 1 00:00:10.862 Notification Interface Dot11Radio1, changed state to reset
18 Mar 1 00:00:10.832 Notification SNMP agent on host ap1 is undergoing a cold start
19 Mar 1 00:00:10.832 Notification System restarted --
20 Mar 1 00:00:10.829 Notification Configured from memory by console
21 Mar 1 00:00:10.510 Error Interface FastEthernet0, changed state to up
22 Mar 1 00:00:08.345 Critical RADIO crypto FIPS self test passed on interface Dot11Radio 1
23 Mar 1 00:00:06.964 Critical RADIO crypto FIPS self test passed on interface Dot11Radio 0
24 Mar 1 00:00:05.553 Critical IOS crypto FIPS self test passed

Do someone know what my problem is, this morning i have change the switch port the AP is on, to CISCO ACCESS POINT, is at 2950 cisco switch, hope that works.

Kind Regards
The administrator has disabled public write access.

Re: AP needs to restart every morning 7 years 8 months ago #29751

  • S0lo
  • S0lo's Avatar
  • Offline
  • Moderator
  • Posts: 1577
  • Thank you received: 7
  • Karma: 3
Do someone know what my problem is, this morning i have change the switch port the AP is on, to CISCO ACCESS POINT, is at 2950 cisco switch, hope that works.

If that doesn't work, Try changing the cable reaching to the switch or at least re-crimp the RJ45 heads. If no use too, then try resetting the AP to it's factory defaults and reconfiguring. Usually there is a pin head button for resetting to factory defaults.
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
The administrator has disabled public write access.
Time to create page: 0.075 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup