Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: routing question

routing question 6 years 6 months ago #33949

  • sam4sg
  • sam4sg's Avatar
  • Offline
  • New Member
  • Posts: 10
  • Karma: 0
Hi,

Here is my typical setup.

PC10 <-> Router11 <-> Router12 <-> Router22 <-> Router21 <-> PC20


PC10 is connected to Router11
Can Ping PC10 from Router11

Router11 and Router12 are running IGRP
Can ping PC10 from Router12

Similarly, from the other end,
PC20 is connected to Router21
Can Ping pc20 from Router21

Router21 and Router22 are running IGRP
Can ping PC20 from Router22

Now,

Router12 and Router22 are running identical OSPF setting:

router ospf 1
log-adjacency-changes
redistribute eigrp 1 metric 66 metric-type 1 subnets
network 200.200.2.0 0.0.0.255 area 0

both router12 and router22 have the similar command.


router 12 and router 22 have these identical IGRP settings:

router eigrp 1
network 200.200.0.0 0.0.0.3
no auto-summary




when I do sh ip route on both routers, I can see all the networks that but when I ping or traeroute, it does not work. It works only from one side., but not from other side.

I tried
redistribute eigrp 1 metric 66 metric-type 1 subnets in one
and redistribute eigrp 1 metric 77 metric-type 1 subnets in another, but still its one sided.


So what am I missing here ?


Thanks,
Sam
The administrator has disabled public write access.

Re: routing question 6 years 6 months ago #33950

  • sam4sg
  • sam4sg's Avatar
  • Offline
  • New Member
  • Posts: 10
  • Karma: 0
solved .

got a bit of reading to do.



Thanks again.
The administrator has disabled public write access.
Time to create page: 0.072 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup