Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: static ip routing issue

static ip routing issue 10 years 5 months ago #26383

  • omer84
  • omer84's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Karma: 1
  • Thank you received: 0
1>ip route 0.0.0.0 0.0.0.0 89.202.22.111

2>ip route 192.168.10.10 255.255.255.0 62.215.18.181

Guyz could any one explain whats actually happening in the above two static statements.
THX

Re: static ip routing issue 10 years 5 months ago #26392

1 ) The 0.0.0.0 0.0.0.0 indicates traffic from any source to be forwarded to the next hop IP of 89.202.22.111, only if the destination network is not found in any of the routing table entries. This will be used as the default route a.k.a gateway of last resort.

2) This routes traffic destined for the 192.168.10.x network to be forwarded to the next hop IP of 62.215.18.181.

Re: static ip routing issue 10 years 5 months ago #26400

1. This defines the default route. This is the route taken when the path to a destination is not found in the RIB.

2. You define in your statement a path to the host 192.168.10.10 255.255.255.0 through 62.215.18.181 but in actuality, since you didn't define a /32 specific host, you are actually defining a path to the subnetwork 192.168.10.0 255.255.255.0 through 62.215.18.181. Since you did not define this route as a /32 route, the router will AND the host and subnetwork and create a path to the network through the defined gateway in the routing information base.


1>ip route 0.0.0.0 0.0.0.0 89.202.22.111

2>ip route 192.168.10.10 255.255.255.0 62.215.18.181

Guyz could any one explain whats actually happening in the above two static statements.
THX

  • Page:
  • 1
Time to create page: 0.136 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup