TOPIC: quick help needed

quick help needed 10 years 9 months ago #25931

m2r007 Topic Author Offline Frequent Member Posts: 24 Thank you received: 0	I have test beds in the 172.16.110.xxx series and my server has a ip of 10.13.221.xxx.. what and which are the best ways to have connection between them????

Re: quick help needed 10 years 9 months ago #25940

sp1k3tou Offline Frequent Member Posts: 65 Thank you received: 0	You need a layer 3 device doing inter vlan routing.

Re: quick help needed 10 years 9 months ago #25944

Chris
Offline
Administrator
Posts: 1447
Karma: 8
Thank you received: 13

As m2r007 noted, you will require a layer 3 switch that will perform the routing between the two networks.

The same result can be archived with a server or router that will need to exist in both logical networks simultaneously so it can perform the routing.

I'd also suggest you take a quick look at our article covering subnet communications and routing to help give you a more graphical view of the above suggestions:

www.firewall.cx/ip-subnetting-routing.php

Cheers,

Chris Partsenidis.
Founder & Editor-in-Chief
www.Firewall.cx

thanks 4 the reply guys 10 years 9 months ago #25954

m2r007 Topic Author Offline Frequent Member Posts: 24 Thank you received: 0	pcs in ip addr range 10.13.217.xxx can access the test beds but not 10.13.221.xxx ...........r they in diff subnet?? or Access list blocking???

Re: quick help needed 10 years 9 months ago #26121

skepticals Offline Expert Member Posts: 783 Thank you received: 0	Depends, what are the subnet masks in use?

Re: quick help needed 10 years 9 months ago #26127

S0lo Offline Moderator Posts: 1577 Karma: 3 Thank you received: 7	It would help of you could give us more details about your network. What router(s), subnet-masks used, how they are connected. Studying CCNP... Ammar Muqaddas Forum Moderator www.firewall.cx