Hot Downloads



The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1


VOIP 11 years 10 months ago #20793

Hi Guyz,

I have one BIG question about VOIP setup ...

My PC is connected to VOIP Phone and my VOIP is connected to Network Port.

When i check my PC IP address i am getting 199.50.X.X

also when i check my VOIP network settings i am getting IP 10.1.X.X

My question is

How its possible me to get 2 ip address ? when we have single connectivity for PC & VOIP.

PC configured for DHCP ....

Can any one help me in this ..

Thanks n Advance

Network Naz

Re: VOIP 11 years 10 months ago #20838

  • krik
  • krik's Avatar
  • Offline
  • Frequent Member
  • Frequent Member
  • Posts: 69
  • Thank you received: 0
Most of IP phones contain a small switch. The connexion between the IP phone and the network is a trunk that carries two VLANs: one for the VoIP traffic and one for the PC's traffic. The connexion between the PC and the IP phone carries only the PC VLAN. As the two end devices (the phone and the PC) are in different VLANs, they use different IP subnets.
Christophe Lemaire

Re: VOIP 11 years 9 months ago #21275

Are you using any USB cable between your Computer and Modem
  • Page:
  • 1
Time to create page: 0.101 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup