Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: VOIP Testing scenario

VOIP Testing scenario 10 years 2 weeks ago #18266

  • taqqi14
  • taqqi14's Avatar
  • Offline
  • Distinguished Member
  • Posts: 91
  • Karma: 0
hi guys!

I have a question about VOIP network .
Lets look at following case

Mitel Ip Phone--->Cisco 2900 layer2 switch--->Mitel IP Phone#2

Will this config works for VOIP call back n forth btw 2 ip phones? or will i need to have SIP Proxy (registering server i.e Asterisk or Call Manager)?
I tried the above config but i cant on IP addresses tht i gave to 2 ip phones (10.0.0.1 & 10.0.0.2) .Mitel ip phone doesnt give me some kinda mapping through which i can map may b 10.0.0.1 = ext 111
10.0.0.2 = ext 222 so tht i can call using these map numbers.And it doesnt allow me to dial on ip addresses..Need help mates

Rgds
Taqqi
The administrator has disabled public write access.

Re: VOIP Testing scenario 10 years 2 weeks ago #18269

  • Ranger24
  • Ranger24's Avatar
  • Offline
  • Distinguished Member
  • Posts: 145
  • Karma: 0
Hi Taqqi,

I have not used Mitel IP phones so cannot comment on the config. However I would suggest the following would be a better test lab:
[code:1]
Mitel Ip Phone--->Cisco 2900 layer2 switch--->Mitel IP Phone#2
|
|
Sip Server
[/code:1]

For the sip server (proxy) you can use asterix (LINUX) or OnDo (windows).

I'd also use the following addressing:

Mitel IP Phone #1: 10.0.0.1
Mitel IP Phone #2: 10.0.0.2
SIP Server: 10.0.0.254

Then within the sip server you can set the mapping for IP to Ext.

R

Patience - the last reserve of the any engineer
The administrator has disabled public write access.

Re: VOIP Testing scenario 10 years 2 weeks ago #18273

  • taqqi14
  • taqqi14's Avatar
  • Offline
  • Distinguished Member
  • Posts: 91
  • Karma: 0
Yes tht way it works...but i just wana confirm if i can direct dial from one ip phone to another ip phone without using sip proxy server.
HOTLINE function works in this case but mapping of number (i.e 111 ext ) is possible or not i m not sure.

Thnx Ranger

Rgds
Taqqi
The administrator has disabled public write access.

Re: VOIP Testing scenario 10 years 2 weeks ago #18346

  • taqqi14
  • taqqi14's Avatar
  • Offline
  • Distinguished Member
  • Posts: 91
  • Karma: 0
OK i got it to work...Mitel Ip Phone has web configurator by which mapping from ip to extension number can b achived ...

Thx

Taqqi
The administrator has disabled public write access.
Time to create page: 0.076 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup