Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Cisco 2612 router running IOS 11.3 for CCNA labs.

Cisco 2612 router running IOS 11.3 for CCNA labs. 12 years 3 weeks ago #17548

Running 2 2600 series and a switch for CCNA lab purposes-One router is a2620(IOS 12.2) the others a 2612(IOS11.3). Does Anybody know if IOS version 11.3 will use subnet 0 by default when applying a VLSM config to it, or will it need the ip subnet zero command? Im hoping this is the reason the IOS is telling me 'bad mask' when applying a /30 VLSM to the serial interface. Could somebody please help me with this matter. Also where is the best place to purchase flash memory from? I cant update the IOS on the 2612 untill it has enough memory. :roll: :wink:

Re: Cisco 2612 router running IOS 11.3 for CCNA labs. 12 years 3 weeks ago #17559

ip subnet zero isn't usually a default. Try enabling it using the command and then try adding your mask. It should be easy to prove the case that way
  • Page:
  • 1
Time to create page: 0.145 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup