Hot Downloads

Welcome, Guest
Username: Password: Remember me


ACL's 11 years 9 months ago #15371

  • anon40
  • anon40's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
i am a ccna course and i am trying to find information on cisco ACL's. the information i am looking for is how write them in simple terms. i would be greatful if anyone has any suggestions.
The administrator has disabled public write access.

Re: ACL's 11 years 9 months ago #15624

  • BiT
  • BiT's Avatar
  • Offline
  • New Member
  • Posts: 4
  • Karma: 0
As you know from the CCNA course there are basic ACLs and extended ACLs.
The syntax for a basic ACL is:

[code:1]Router(config)#access-list [access-list-number] {permit | deny} [source IP address] [wildcard mask(optional)][/code:1]

Basic ACLs can obtain numbers from 1 to 99 and from 1300 to 1999.
An example of a basic ACL would be:

[code:1]Router(config)#access-list 1 permit[/code:1]

This would translate as:

Permit all traffic from

Extended ACLs are a bit more complicated but they give you more flexibility and security.


[code:1]Router(config)#access-list [access-list-number] {permit | deny} {tcp | udp} [source IP address] [source wildcard mask] [destination IP address] [destination wildcard mask] [/code:1]

Extended ACL numbers are from 100 to 199 and from 2000 to 2699.

Example of an extended ACL:
[code:1]Router(config)#access-list 113 permit tcp any eq telnet[/code:1]

Permit all telnet traffic from network

Don't forget to apply the access-list to an interface after you've configured it. ;)

Of course, this is only the basic concept. Other extra commands can be added to the configuration of an extended ACL, depending on the requirements.
The administrator has disabled public write access.
Time to create page: 0.092 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup