Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Routing between two separate networks

Routing between two separate networks 10 years 5 months ago #14047

  • alerizwe
  • alerizwe's Avatar
  • Offline
  • New Member
  • Posts: 8
  • Karma: 0
I have a linux servr running fc3 i have two netwrk cards in that server
like one has ip address 192.168.5.1 and the other 192.168.2.1
i wanted to inquire are they inter-routable by default like a pc on 192.168.2.1 network can ssh and ping a pc on 192.168.5.1 by default or do i have to sdo something else to make it work.
The administrator has disabled public write access.

Re: Routing between two separate networks 10 years 5 months ago #14050

  • nske
  • nske's Avatar
  • Offline
  • Expert Member
  • Posts: 613
  • Karma: 0
Hello,

Provided the hosts on both networks are configured to use your fc3 box as a gateway (for the appropriate subnets), you should only have to enable "IP forwarding" on your linux box to have this working. You can do this by issuing:
echo 1 > /proc/sys/net/ipv4/ip_forward
The administrator has disabled public write access.
Time to create page: 0.071 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup