Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Connecting 2950 and 3550 Switch

Connecting 2950 and 3550 Switch 10 years 10 months ago #12683

Hi All

I was wondering if someone could tell me where I have possibly gone wrong.

I have connected 2 2950 switches together and a 3550 switch to one
of the 2950's. I have configured the following on all the switches:

Vlan 1 with ip address and no shut

Each interface connected to another switch is configured as a trunk and on the 3550 I have configured the encapsulation to be dot1q.

Now, the problem I am having is:

I can ping the 2950's from each other.
I can ping the 3550 from the 2950 it is connected to, BUT

I cannot ping the 2950 connected to the 3550, from the 3550!!!

What have I left out??

Thanks in advance :)
The administrator has disabled public write access.

Re: Connecting 2950 and 3550 Switch 10 years 10 months ago #12684

I fired up the simulator this morning and it is all working, must be a bug in Boson Net Sim.
The administrator has disabled public write access.
Time to create page: 0.082 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup