Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: ASA Local ID Set IPSEC - How?

ASA Local ID Set IPSEC - How? 7 years 11 months ago #35622

  • Snooty
  • Snooty's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
Hello,

I have a IPSEC VPN from a 5505 device connecting to HeadOffice.

On the ASA5505 I need to know how I can set the local id to a IP address of my choice.

ASA5505=DHCP=Router=PublicIP===Internet==PublicIP==HeadOffice

The Headoffice IPSEC is set to connect to my public IP + PSK

The problem is that my ASA5505 is behind a router so
my localId presented to the VPN is that set by the the router via DHCP.

As a result the VPN tunnel will not establish and errors with
Invalid ID Info ( 18 ) , Invalid Message ID ( 9 )

I need to work out how to set the
LocalID of the ASA unit to my PublicIP address e.g 85.190.142.68

Any insight appreciated.

Thanks
Pete
  • Page:
  • 1
Time to create page: 0.112 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup