Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: TCP Port 2001 - 2010

TCP Port 2001 - 2010 9 years 7 months ago #20741

  • hoppy
  • hoppy's Avatar
  • Offline
  • New Member
  • Posts: 2
  • Karma: 0
It says I must open these ports to use the lab. If I knew how to do that, I wouldn't need the lab. :)

So what do I need to check?
The administrator has disabled public write access.

Re: TCP Port 2001 - 2010 9 years 7 months ago #20742

  • smitherton
  • smitherton's Avatar
  • Offline
  • Frequent Member
  • Posts: 60
  • Karma: 0
I have yet to use the lab but, I would imagine that you need to open a tcp port in your firewall to get reliable service. So, if you are using a linksys type router; open the 200x ports and also do the same on your firewall in winodws, or whatever OS you are using.
The administrator has disabled public write access.

Re: TCP Port 2001 - 2010 9 years 7 months ago #20743

  • Smurf
  • Smurf's Avatar
  • Offline
  • Moderator
  • Posts: 1390
  • Karma: 1
You hopefully shouldn't need to do anything other then ensure that you can either send requests to these ports on your local firewall or allow something like telnet to run on the firewall.

Most DSL routers will allow traffic outbound (and allow returning traffic) so you shouldn't need anything doing on these devices (unless you have locked them down to specific traffic going out).

If you are struggling then please let us know what firewalls and/or routers you are using so we can best advise.

Regards
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx

Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
The administrator has disabled public write access.

Re: TCP Port 2001 - 2010 9 years 7 months ago #20777

  • hoppy
  • hoppy's Avatar
  • Offline
  • New Member
  • Posts: 2
  • Karma: 0
The firewall is a pix 515e but I won't know until the lab starts in a couple of weeks.
The administrator has disabled public write access.

Re: TCP Port 2001 - 2010 9 years 7 months ago #20780

  • Smurf
  • Smurf's Avatar
  • Offline
  • Moderator
  • Posts: 1390
  • Karma: 1
Providing tcp ports 2001 -2010 are allowed outbound on the pix then you shouldn't have any issues with the lab.
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx

Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
The administrator has disabled public write access.
Time to create page: 0.080 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup