Hot Downloads

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Error on logging into lab

Error on logging into lab 9 years 6 months ago #20377

  • joy
  • joy's Avatar
  • Offline
  • New Member
  • Posts: 2
  • Karma: 0
I received the following message:

Error: We're sorry, but we are currently experiencing technical diffculties concerning the firewall. Please contact an administrator.
The administrator has disabled public write access.

Re: Error on logging into lab 9 years 6 months ago #20378

  • Chris
  • Chris's Avatar
  • Offline
  • Administrator
  • Posts: 1446
  • Thank you received: 13
  • Karma: 8
Must have been a glitch in the system.
Try again and let us know if the problem persists.

Cheers,
Chris Partsenidis.
Founder & Editor-in-Chief
www.Firewall.cx
The administrator has disabled public write access.

Still have the same error.... 9 years 6 months ago #20392

  • joy
  • joy's Avatar
  • Offline
  • New Member
  • Posts: 2
  • Karma: 0
I tried this morning and I received the same error message.

· Retrieving your Cisco Lab details...
· Dynamic firewall modification for your IP address 71.207.136.228...

Error: We're sorry, but we are currently experiencing technical diffculties concerning the firewall. Please contact an administrator.
Back

tried to use ie and firefox
The administrator has disabled public write access.

Re: Error on logging into lab 9 years 6 months ago #20433

Were you downloading something while trying to access the lab? Try to have your downlink bandwidth free as much as possible. The initial software itself has some flash while its accessing the lab.

I myself had this error one day, first two parameters was able to fetch but the last one was timing out. My bandwidth pipe was busy, but the next time it was ok.

Just a suggestion.

Rgds,
-arif
www.ciscojournal.com (coming soon)
The administrator has disabled public write access.

Cannot log in to Lab 9 years 6 months ago #20458

  • pid0
  • pid0's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
Hello whne I tryed to log into my scheduled lab the following message is shown and ... thats it:

error message

Retrieving your Cisco Lab details...
· Dynamic firewall modification for your IP address 62.245.116.--... PORT: 2001 PORT: 2002

Error: We're sorry, but we are currently experiencing technical diffculties concerning the firewall. Please contact an administrator.
Back
error message

can you please check and give some advice?
The administrator has disabled public write access.

Re: Error on logging into lab 9 years 5 months ago #20483

  • TheBishop
  • TheBishop's Avatar
  • Offline
  • Moderator
  • Posts: 1719
  • Thank you received: 8
  • Karma: 5
Hello pid0, sorry you've been having problems.
It may have been a temporary problem with the firewall. Please try again and report back if it still does not work.
Also if you have a personal firewall on your PC you might want to try disabling it temporarily to see if that is the problem
Thirdly, once you've made your booking make sure it is for the day and time you intended by checking in the calendar and reviewing the confirmation email
Let us know how you get on
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.084 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup