Hot Downloads



The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Configure Static IP on PIX 501

Configure Static IP on PIX 501 13 years 7 months ago #8836

Hi, I am a newbie. So, please forgive me if any of my quesions are silly.
My ISP is Covad. I have 5 static IPs from them.
Covad has provided me with Broadxent 8120 ADSL modem/Router. I also have PIX 501 firewall.
I want to configure my PIX 501 to one of the provided static IP.
MY problem is that I am able to configure the outside interface of 501 as DHCP and receive one of the ip from the 8120 router but when I configure the 501 with static IP the interface does show come up but it I am not able to use the internet.
Thanks for your help.
Mayank Patel

Re: Configure Static IP on PIX 501 13 years 7 months ago #8840

Have you configured your ISP's mac address on the router? On my router, I had to use my ISP's mac address in order to get any internet working.

Cannot browse Internet ?? 13 years 6 months ago #9026


After your firewall gets a DHCP address from the router, can you ping the ip from the firewall ?

When you say that you are not able to get to Internet are you trying to go to Internet from behind the firewall ? If yes then did you configure nat and global on the 501.

nat (inside) 1 0 0
global (outside) 1 interface

  • Page:
  • 1
Time to create page: 0.141 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup