Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Configuration required for ASA5505

Configuration required for ASA5505 6 years 5 months ago #34678

  • simwintech
  • simwintech's Avatar
  • Offline
  • New Member
  • Posts: 10
  • Karma: 0
we have two ASA5505 connected with each other using fiber optic cable at a distance of 500km in Building A and Building B.

There are four vlans available in Building A.
Vlan 60, Vlan 70, Vlan 80 and Vlan 90.

and 5 Vlans in Building B.
Vlan 22, Vlan 32, vlan 42, vlan 52 and Vlan 90.


These Vlans are configured in Cisco 3560 switches at each building.

We would like to pass vlan 90 between Building A and Building B.

My Query is,

- Both ASAs should be connected each other in outside vlan 2 (Interface ethernet 0/0 ) or inside vlan 1 (interface ethernet 0/1).
- what is the configuration required in both ASAs.
The administrator has disabled public write access.
Time to create page: 0.072 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup