Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Netgear ADSL router to PIX

Netgear ADSL router to PIX 7 years 1 month ago #32146

  • sh500
  • sh500's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
Hi all,

I've just taken over a small network setup:

We have about 20 users who connect to a 2MB ADSL line. The original router Efficient Networks 5861 (provided by a company now gone bust) had a power failure. This router was also locked down to just show 'connect' and 'disconnect' on the web interface.

Anyway we now have a Netgear DG834 router (until we find a more permanent solution). I've configured it for the internet, but am having problems to communicate to our Cisco PIX.

I have details of all IP addresses (for the router and PIX). The old router was working fine going through the PIX then to the switches and end users. So I am guessing, I am missing something on the Netgear router that is stopping it connecting to the PIX (a static route perhaps?)

Any help on this would be much appreciated.
The administrator has disabled public write access.
Time to create page: 0.073 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup