Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Cannot access Router IP on FE0/0 from internal switch

Cannot access Router IP on FE0/0 from internal switch 7 years 9 months ago #29508

  • tomcoombs
  • tomcoombs's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
Please excuse my (probably) basic question.

I have a 2811, with a 9 port POE switch fitted internally. I have connected a variety of devices to the switch and all route/communicate correctly. (Shows as FastEthernet0/1/0 thru 8)

I have connected a patch cable between FastEthernet0/0 and the switch, to enable network configuration of the router from another switch connected device.

The ports come to the UPSTATE but I cannot ping the "router" address.

I suspect this is a vlan thing, but everythign is on the default vlan (1).

Any tips?
The administrator has disabled public write access.

Re: Cannot access Router IP on FE0/0 from internal switch 7 years 9 months ago #29540

  • Chojin
  • Chojin's Avatar
  • Offline
  • Senior Member
  • Posts: 251
  • Karma: 0
What IP addresses are you using?
Also give the subnets.

How did you configure the router IP address?

Regards,
Chojin (Ferry)
CCNA / CCNP / CCNA - Security / CCIP / Prince2 / Checkpoint CCSA
The administrator has disabled public write access.

Re: Cannot access Router IP on FE0/0 from internal switch 7 years 9 months ago #29541

  • S0lo
  • S0lo's Avatar
  • Offline
  • Moderator
  • Posts: 1577
  • Thank you received: 7
  • Karma: 3
Posting both configs can help us help you.
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
The administrator has disabled public write access.

Re: Cannot access Router IP on FE0/0 from internal switch 7 years 9 months ago #29542

  • Chojin
  • Chojin's Avatar
  • Offline
  • Senior Member
  • Posts: 251
  • Karma: 0
Posting both configs can help us help you.

Isn't that a quote from the army? :)
CCNA / CCNP / CCNA - Security / CCIP / Prince2 / Checkpoint CCSA
The administrator has disabled public write access.

Re: Cannot access Router IP on FE0/0 from internal switch 7 years 9 months ago #29591

  • S0lo
  • S0lo's Avatar
  • Offline
  • Moderator
  • Posts: 1577
  • Thank you received: 7
  • Karma: 3
Posting both configs can help us help you.

Isn't that a quote from the army? :)

;)
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
The administrator has disabled public write access.
Time to create page: 0.082 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup