Hot Downloads



The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Setup ASA 5505

Setup ASA 5505 10 years 4 months ago #28013

Hi All,

I relatively new to ASA5505 devices, but I try to understand the following: My ISP provides me with 4 static IP's in a so call routed subnet, so no NAT is available. I don't understand how to setup a internet connection for the inside network. Let me explain. My ADSL modem provides four utp connections all responsible for one external IP address. To connect to the internet I setup an Linksys device (RV042) connected to one port of my ADSL modem. To set it up I must configure a static WAN IP, a subnet and a (external and in the same range) gateway. Works fine!

I would like to setup Remote Access by VPN, using VPN client software, but I don''t understand how to configure my ASA5505 to connect the internal network (behind the ASA) with the external (internet). Do I have to use the RV042 linksys between, or can I connect my ASA directly to my ADSL modem? Is it possible to use my ASA when only routed subnet is available?

Using the Cisco ASDM utility I see it's possible to setup port '0' as an Outside port, connecting to an external network (internet), and it is possible to set it up for an static IP, but to connect it properly to my ADSL modem it needs an gateway IP aswell...what isn't possible... :( So I'm stuck in the mud now.... Any help is welcome!
  • Page:
  • 1
Time to create page: 0.093 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup