Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: I need help for configuring Nat in cisco ASA 5510

I need help for configuring Nat in cisco ASA 5510 8 years 2 months ago #27380

  • nandas
  • nandas's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
Hi Techie friends,

I am using cisco ASA 5510 firewall, i want to configure one webserver for public access. i am using ASDM 6 GUI interface for configuration, can any body help me on this ? , below i have mentioned the configuration parameters

Private IP : 10.102.0.50
Public IP : 125.15.176.23
Required Port : 80

Since i am a basic firewall user can any help me on this...i will be more thankful to them.


Thanks in advance.
Nand
The administrator has disabled public write access.

Re: I need help for configuring Nat in cisco ASA 5510 8 years 2 months ago #27383

  • Elohim
  • Elohim's Avatar
  • Offline
  • Senior Member
  • Posts: 220
  • Karma: 0
static (inside,outside) tcp 125.15.176.23 80 10.102.0.50 80 netmask 255.255.255.255

access-list 101 permit tcp any eq 80 125.15.176.23 255.255.255.255 eq 80

access-group 101 in interface outside
Hi Techie friends,

I am using cisco ASA 5510 firewall, i want to configure one webserver for public access. i am using ASDM 6 GUI interface for configuration, can any body help me on this ? , below i have mentioned the configuration parameters

Private IP : 10.102.0.50
Public IP : 125.15.176.23
Required Port : 80

Since i am a basic firewall user can any help me on this...i will be more thankful to them.


Thanks in advance.
Nand
The administrator has disabled public write access.
Time to create page: 0.071 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup