Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Simple static Natting on my ASA5510

Simple static Natting on my ASA5510 8 years 3 months ago #26817

  • Chojin
  • Chojin's Avatar
  • Offline
  • Senior Member
  • Posts: 251
  • Karma: 0
Hi guys,

I'm just starting into our Cisco ASA for a bit of playing.. and now I've come to the following 'issue'.

It's probably not that hard.. but.. I still need ya help :).

We are going to setup a VPN tunnel between 2 companies.

I would like to NAT some addresses for the servers contacted in our company.

So, the client would access virtual ip address : over the vpn which is on our internal side, but actually the is the

so this would mean :

Client will try to connect to over the VPN.
Our cisco ASA box will accept this connection and will spit it onto our internal network, but instead of it will spit

Before trying and playing with our config I just wanted to double check my idea.

for this I had something in mind as

-setup the vpn (not a problem)
-nat the address (thats the 'problem')

Would it be something as :

static (InternalNetwork,InternalNetwork) netmask

Thanks for ur help
CCNA / CCNP / CCNA - Security / CCIP / Prince2 / Checkpoint CCSA
The administrator has disabled public write access.
Time to create page: 0.070 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup