Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Make Routers Talk

Make Routers Talk 9 years 5 months ago #22247

  • Lindows
  • Lindows's Avatar
  • Offline
  • Senior Member
  • Posts: 246
  • Karma: 0
Hi Guys

I have two routers

Router 1 192.168.1.10
Router 2 192.168.2.1

Now all my computers are wired into router 1 and wireless devices receive internet access through router 2. Now, my question is, how can i configure router 2 while plugged in physically to router 1. Also Is this a good way to separate a ftp server from my internal network by placing it on router 2.

Lindows
The administrator has disabled public write access.

Re: Make Routers Talk 9 years 5 months ago #22252

  • TheBishop
  • TheBishop's Avatar
  • Offline
  • Moderator
  • Posts: 1719
  • Thank you received: 8
  • Karma: 5
I'm not sure I understand the question. Are your two routers connected together or are these two separate networks?
The administrator has disabled public write access.

Talking Routers Part II 9 years 5 months ago #22255

  • Lindows
  • Lindows's Avatar
  • Offline
  • Senior Member
  • Posts: 246
  • Karma: 0
Hi

Sorry for not being clear the first time. Well router 1 is a dlink router with the ip address range of 192.168.1.1 and the second router is a linksys with the ip range of 192.168.2.1. No my question is, if i only physically connected to the blink, is it possible to map a port or gateway that will allow me to configure linksys from the system computer, or do i have to be physically plugged in both.


lindows
The administrator has disabled public write access.

Re: Make Routers Talk 9 years 5 months ago #22256

  • Smurf
  • Smurf's Avatar
  • Offline
  • Moderator
  • Posts: 1390
  • Karma: 1
You will need some sort of physical link between the two routers, unless you dual home you PC.
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx

Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
The administrator has disabled public write access.

Re: Make Routers Talk 9 years 5 months ago #22258

  • skepticals
  • skepticals's Avatar
  • Offline
  • Expert Member
  • Posts: 783
  • Karma: 0
I'm still a little foggy on your network setup, but if you can communicate accross the networks, you could use the web-based interface to configure both routers.
The administrator has disabled public write access.

Re: Make Routers Talk 9 years 5 months ago #22263

If I am reading this right it sounds like you want to allow external administration from the WAN side on the linksys.

There should be an option to allow this.
The administrator has disabled public write access.
Time to create page: 0.082 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup