Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Netasq f50 firewall, cannot ping to other segment...

Netasq f50 firewall, cannot ping to other segment... 11 years 3 months ago #21815

There is some problem while configuring this firewall. Here is the lab environment for this firewall.

For dmz pc, I’m using ip addr 10.0.0.21, gw is 10.0.0.1 (this is dmz segment)
N for internal network, I’m using ip 172.168.0.21 for testing n 172.168.0.3 for gateway…

172.168.0.21
172.168.0.3--- 10.0.0.1
10.0.0.21
Internal pc fw internal fw dmz dmz pc

The problem is I cannot ping from dmz pc to internal pc

here is the syslog from the fw that shows it already pass the fw...

ruleid=1 srcif="Ethernet2" srcifname="dmz" ipproto=icmp icmptype=8 icmpcode=0 proto=icmp src=10.0.0.21 srcname=dmzpc dst=172.168.0.21 action=pass logtype="filter"

but how come result from the ping shows time out…
there’s no personal firewall inside the testing machine.
  • Page:
  • 1
Time to create page: 0.124 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup