Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: pix port translation?

pix port translation? 9 years 8 months ago #20703

Here is my issue.

I have 1 public IP left. I have two internal machines that I need to be able to access externally via public address. Problem is, both of these machines run what I need on port 80 and I cannot change the port.

Is there a way to do a port translation/forwarding type deal here? Example: If I goto 66.45.*.40:8060, it would forward to port 80 on internal machine 1 (192.168.1.10). If I goto 66.45.*.40:8070, it would forward to port 80 on internal machine 2 (192.168.1.11).

Does that make sense? Hopefully it does.

Thanks
The administrator has disabled public write access.

Re: pix port translation? 9 years 8 months ago #20704

  • Smurf
  • Smurf's Avatar
  • Offline
  • Moderator
  • Posts: 1390
  • Karma: 1
Hi there,

Yes this can be done using a static command. This is take off Ciscos Website;

[code:1]To translate a well-known port (80) to another port (8080), enter:

static (inside,outside) tcp 10.1.2.45 80 10.1.1.16 8080 netmask 255.255.255.255
[/code:1]

Cheers
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx

Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
The administrator has disabled public write access.
Time to create page: 0.074 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup