TOPIC: How can I get IPs from PIX 501 with unknown enable password?

How can I get IPs from PIX 501 with unknown enable password? 11 years 3 months ago #20397

rtmillerx
Topic Author
Offline
New Member
Posts: 2
Thank you received: 0

Hi
I was given an older PIX 501 and can console in no problem. Need to TFTP the password reset bin file but cant seem to figure out how to get the IPs from PIX as "show ip" wont work until enable password is reset. Is is there another way to use "show ip"command or get IPs
Mostly self teaching here so thanks in advance

Please Log in to join the conversation.

Re: How can I get IPs from PIX 501 with unknown enable password? 11 years 3 months ago #20398

Smurf Offline Moderator Posts: 1390 Karma: 1 Thank you received: 0	You shouldn't need to list the IP Addresses on the interface as the password recovery procedure goes through assigning an ip address. http://www.cisco.com/warp/public/110/34.shtml Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. Wayne Murphy Firewall.cx Team Member www.firewall.cx Now working for a Security Company called Sec-1 Ltd in the UK, for any Penetration Testing work visit www.sec-1.com or PM me for details.

What do I put on the address line 11 years 3 months ago #20420

rtmillerx Topic Author Offline New Member Posts: 2 Thank you received: 0	The link says to use the address command to specify the IP address of the PIX Firewall's interface How do I get that? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation.

Re: How can I get IPs from PIX 501 with unknown enable password? 11 years 3 months ago #20421

Smurf Offline Moderator Posts: 1390 Karma: 1 Thank you received: 0	Thats refering to the address you want to assign to that interface. It needs to be an address thats on the same subnet as your tftp server. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. Wayne Murphy Firewall.cx Team Member www.firewall.cx Now working for a Security Company called Sec-1 Ltd in the UK, for any Penetration Testing work visit www.sec-1.com or PM me for details.