Hot Downloads

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: IPCop+ with TIVO problem

IPCop+ with TIVO problem 12 years 2 weeks ago #15015

I am using IPCop+ and have a TIVO user on my network. TIVO was being blocked, and I am using these scripts temporarily to get through.

I would like to know if there is a more efficient way to handle this problem.

# Hack for tivo
/sbin/iptables -t nat -A CUSTOMPREROUTING -i eth0 -s 192.168.2.11 -p tcp --dport 80 -j ACCEPT
/sbin/iptables -t nat -A CUSTOMPREROUTING -i eth0 -s 192.168.2.11 -p udp --dport 80 -j ACCEPT
/sbin/iptables -A CUSTOMFORWARD -i eth0 -s 192.168.2.11 -p tcp --dport 80 -j ACCEPT
/sbin/iptables -A CUSTOMFORWARD -i eth0 -s 192.168.2.11 -p udp --dport 80 -j ACCEPT

For instancce I tried -p all and that did not work (I don't know why?)

I don't know much about IPTables.

Please Log in to join the conversation.

Re: IPCop+ with TIVO problem 12 years 2 weeks ago #15021

  • DaLight
  • DaLight's Avatar
  • Offline
  • Honored Member
  • Honored Member
  • Posts: 1302
  • Karma: 1
  • Thank you received: 0
Welcome to firewall.cx, ItsHardOutThere.

What exactly do you want to do? By default, your IPCOP will allow all traffic out unless the default configuration has been changed. Have any changes been made to your /etc/rc.d/rc.local or /etc/rc.d/rc.firewall.local files. Also, is the Proxy active and is it set to TRANSPARENT?

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.121 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup