Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: success with connecting to firewall, but...

success with connecting to firewall, but... 12 years 3 months ago #14951

  • rcpr
  • rcpr's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 5
  • Thank you received: 0
I am now able to connect my vpn client to our firewall (pix 506e) at the office. but that is all. i am connected, but i can't see anything on our network in "my network places". thus i can't map a drive within the network. it didn't prompt me for a windows logon...

any suggestions?

VPN 12 years 3 months ago #14953

Sounds like you have a link but can't route across it. Check you don't have the same IP network in use at both ends of the link and that you have the appropriate routing entries in place. You can do some basic checks by seeing if you can ping over the link and checking what you've got at the client end with ipconfig /all and route print

Re: success with connecting to firewall, but... 12 years 3 months ago #15039

Most firewalls you have to allow netbios traffic to see things in my network places.

Also ping across to the other network/office to a PC you know the ip to. If it pings back then add network drive with ip (or enable netbios traffic over vpn) \\X.X.X.X\(share name\ this way you dont need the computer name just the ip.

Im assuming your setting up a network drive to a server that the ip is static....
The Bublitz
Systems Admin
Hospice of the Red River Valley
  • Page:
  • 1
Time to create page: 0.138 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup