Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Site-to-Site VPN between a Router and a PIX Firewall

Site-to-Site VPN between a Router and a PIX Firewall 12 years 2 months ago #14361

  • Remis
  • Remis's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
I have a little problem. I've been given the scenario on configuring a Site-to-Site VPN between a Router 2600 series Cisco Router and a PIX Firewall .,.,. Anyone have any basic suggestions on what i should do?!

Re: Site-to-Site VPN between a Router and a PIX Firewall 12 years 2 months ago #14378

hi.
yesterday I made the lab, and it already works.

If you have experience setting up site to site between routers, there is no difference between the pix, the logic applies the same:

the same pre shared key between both sides.
the remote peer for establishing the sa.
the same encryption, dh, transform set in both sides.
and the same access list mirrored in the opossite site for defining tarffic to send encrypted and traffic to recive encrypted.

If you have pdm try using the wizard for setting up the firewall, its easier than cli.

Re: Site-to-Site VPN between a Router and a PIX Firewall 12 years 2 months ago #14431

Hi,

There is nothing much different in this. You have to do is just give the same IKE and IPSEC policys in both the end.
  • Page:
  • 1
Time to create page: 0.122 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup