Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Opening PIX 525 to remote Desktop

Opening PIX 525 to remote Desktop 10 years 9 months ago #13090

  • Daisan
  • Daisan's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
Hi,

I wanted to open my PIX 525 so that I can Remote Desktop to any PC in my DMZ. Currently, I have only one available IP and using PAT to do this job. I thought I have done the right thing's but kept on falling. Anyone can tell me where did I when wrong...

Here the code I add to my PIX 525 :

name 10.88.88.20 IBMConsole
name 10.88.88.21 PCOne

access-list outside_access_in permit tcp any interface outside eq 3300
access-list outside_access_in permit tcp any interface outside eq 3301

static (dmz,outside) tcp interface 3300 IBMConsole 3389 netmask 255.255.255.255 0 0
static (dmz,outside) tcp interface 3301 PCOne 3389 netmask 255.255.255.255 0 0


:( :cry:
The administrator has disabled public write access.
Time to create page: 0.070 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup