Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: vlan config question

vlan config question 13 years 8 months ago #5848

hello all, i need to vlan a cisco 3548 with 8 vlans. that part is easy, but i want to make a port a member of all 8 vlans and connect it to a pix port so all the vlans can share the firewall interface without being able to see each other. all the vlans will be in the same class c network 192.168.160.x. is this possible? has anyone done this? thanks for any help you can offer.

kabalah

well, it does work 13 years 7 months ago #6145

i gave up waiting. i tested it myself, and it works great! hasn't anyone else done this kind of thing?
kab

Re: vlan config question 13 years 7 months ago #6151

Haven't done this myself.. how did you go about it though ?
Sorry bout the lack of response, somehow I missed this post.


Cheers,

Re: vlan config question 13 years 7 months ago #6160

  • Chris
  • Chris's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 1447
  • Karma: 8
  • Thank you received: 13
kabalah,

Can you post us your solution's configuration so everyone else can view it ? This could be also added into the lab scenarios we are working on.


Cheers,

Re: vlan config question 13 years 6 months ago #6494

oh mate,

u r really a geek out there. i dont know how u make a single port as the member of 8 vlans and then connect to PIX.
does the PIX u are using supports subinterface ?

i really am happy with this type of setup if it works bcoz there is more than security factor involved

please post your config.


with regards
tsunami

Re: vlan config question 13 years 6 months ago #6515

This is what probably worked for him.

Step 1


configure terminal


Enter global configuration mode.

Step 2


interface interface


Enter interface configuration mode, and enter the port to be added to the VLAN.

Step 3


switchport mode multi


Enter the VLAN membership mode for multi-VLAN ports.

Step 4


switchport multi vlan vlan-list


Assign the port to more than one VLAN.
Separate nonconsecutive VLAN IDs with a comma; use a hyphen to designate a range of IDs.

Configuring a switch port for multi-VLAN mode causes VTP to transition to transparent mode, which disables VTP.

Step 5


end


Return to privileged EXEC mode.

Step 6


show interface interface-id switchport


Verify your entries.
  • Page:
  • 1
  • 2
Time to create page: 0.160 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup