Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Cisco ASA 5505

Cisco ASA 5505 6 years 5 months ago #34922

  • AcesHigh
  • AcesHigh's Avatar
  • Offline
  • New Member
  • Posts: 5
  • Karma: 0
Hi, im a cisco noobie trying to set up a cisco network at home. The equipment i've got is a Cisco ASA5505 with security plus license and a Cisco 3560 switch. I've done some basic switch setups before and almost no exprience with ASA. I've been in the ASDM on it but nothing else. My scenario on the ASA should look like this:

I need eth0/0 - Outside that get its IP from a DCHP withing my ISP’s net

Then I need eth0/3 - Inside that run DHCP 192.168.1.100 – 192.168.1.250 with normal Internet access and normal LAN access. This should use eth0/3 through eth0/8 since the last two Ethernet ports has PoE. This way I can use the last two ports for the Cisco WIFI radios with PoE within my LAN.

Third I need a eth0/2 – DMZ on the 10.1.1.0/24 net where I can host two servers. One server with port forwarding : port (UDP): 9987, port (TCP): 30033, port (TCP): 10011. And another server with port forwarding : port (UDP): 17479, port (UDP): 31000.

Is there anyone that can help me out setting this up? I might be able to set up the interfaces but im having serious problems with the NAT/PAT or access rules...
The administrator has disabled public write access.

Re: Cisco ASA 5505 6 years 5 months ago #34934

  • AcesHigh
  • AcesHigh's Avatar
  • Offline
  • New Member
  • Posts: 5
  • Karma: 0
I guess the only thing left to do now is to engage a Cisco professional or go back to the "old" Linksys equipment. At least that worked even if the throughput on this are too low for my use...
The administrator has disabled public write access.

Re: Cisco ASA 5505 6 years 5 months ago #34940

  • skepticals
  • skepticals's Avatar
  • Offline
  • Expert Member
  • Posts: 783
  • Karma: 0
There are multiple configurations listed on this forum... I would fist look at those and then post your config on here if you are having issues.
The administrator has disabled public write access.

Re: Cisco ASA 5505 6 years 5 months ago #34949

  • AcesHigh
  • AcesHigh's Avatar
  • Offline
  • New Member
  • Posts: 5
  • Karma: 0
Okei, i now have managed to get inside, outside and DMZ interfaces to work. I've got normal internet access from both inside and DMZ. Now i need to make rules for the port forwarding on the DMZ interface. Should i use NAT, PAT or ACL for this?
The administrator has disabled public write access.
Time to create page: 0.075 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup