Hot Downloads

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Setup an ASA 5505

Setup an ASA 5505 6 years 3 months ago #34843

  • matoposb0y
  • matoposb0y's Avatar
  • Offline
  • Frequent Member
  • Posts: 26
  • Karma: 0
Hi there, I am trying to set up the following: ADSL -> router with IP address 192.168.1.254 -> ASA 5505. Behind the ASA is my printer and computer and removable drives. I have tried the following config:

interface vlan1
ip address 192.168.32.1 255.255.255.0 (I had tried 192.168.1.1 with no success)
nameif inside

interface vlan 2
ip address 192.168.1.254 255.255.255.0
nameif outside

route outside 0.0.0.0 0.0.0.0 192.168.1.254

global (outside) 10 interface
nat (inside) 10 192.168.32.0 255.255.255.0

Does this look at all right?
The administrator has disabled public write access.

Re: Setup an ASA 5505 6 years 3 months ago #34847

  • matoposb0y
  • matoposb0y's Avatar
  • Offline
  • Frequent Member
  • Posts: 26
  • Karma: 0
Must vlan 2 point to my router IP or my isp ip?
The administrator has disabled public write access.

Re: Setup an ASA 5505 6 years 3 months ago #34855

  • KiLLaBeE
  • KiLLaBeE's Avatar
  • Offline
  • Expert Member
  • Posts: 466
  • Karma: 0
Router IP since that's the next hop. Also, your vlan 2's interface IP address is the same as your router's IP address, therefore it needs to be changed.
The administrator has disabled public write access.

Re: Setup an ASA 5505 6 years 3 months ago #34859

  • matoposb0y
  • matoposb0y's Avatar
  • Offline
  • Frequent Member
  • Posts: 26
  • Karma: 0
Router IP since that's the next hop. Also, your vlan 2's interface IP address is the same as your router's IP address, therefore it needs to be changed.

Thanks for your reply. The vlan 2's interface IP is that the command:- route outside 0.0.0.0 0.0.0.0 192.168.1.254 ? If so should I change it to the ISP IP, i.e. route outside 0.0.0.0 0.0.0.0 xx.xx.139.224? Or is it:- nat (inside) 10 1xx.xx.139.224 255.255.255.248 ?
The administrator has disabled public write access.

Re: Setup an ASA 5505 6 years 3 months ago #34862

  • matoposb0y
  • matoposb0y's Avatar
  • Offline
  • Frequent Member
  • Posts: 26
  • Karma: 0
Should nat (inside) point to my router IP or my ISP IP?
The administrator has disabled public write access.

Re: Setup an ASA 5505 6 years 3 months ago #34864

  • matoposb0y
  • matoposb0y's Avatar
  • Offline
  • Frequent Member
  • Posts: 26
  • Karma: 0
Should I have my adsl router set up as a bridge?
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.082 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup