Hot Downloads

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Need help on my network...

Need help on my network... 8 years 4 months ago #33470

Hi, i'm just new to this CISCO. I'm trying to configure my 1st network which is:

Did all the subnetting to the ip class:

4 routers (ring topology): - router 1 - router 2 - router 3 - router 4

Network A:
- connected to router 1
- connected to switch A
Network B:
- connected to router 3
- connected to switch B

I have already configured but it's not working. I can do pings on the same network. But when i try to ping a host on the other network is not working. any ideas that i need to check with my configuration? thanks.

Please Log in to join the conversation.

Re: Need help on my network... 8 years 4 months ago #33471

  • Nevins
  • Nevins's Avatar
  • Offline
  • Expert Member
  • Expert Member
  • Posts: 438
  • Karma: 4
  • Thank you received: 9
Your going to need to provide more information.

I would start by putting the results of show run in for each node into a paste bin.

In the mean time here is a good example of how to configure the most common routing protocols.

Please Log in to join the conversation.

Useful Threads

Re: Need help on my network... 8 years 4 months ago #33616

  • Losh
  • Losh's Avatar
  • Offline
  • Distinguished Member
  • Distinguished Member
  • Posts: 103
  • Thank you received: 0
what you need to do is tell the router how to reach the host connected to another router.

you do this by configuring either a static route or any routing protocol you know.

I suggest you read more about default gateways, static routes or dynamic routes.
hope this helps abit.

Please Log in to join the conversation.

~ Networking :- Just when u think its starting to make sense......... ~
  • Page:
  • 1
Time to create page: 0.171 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup