Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Need correct IOS to run SDM on a 2650XM

Need correct IOS to run SDM on a 2650XM 8 years 6 months ago #33308

For a lab, I am trying to run SDM, on a 2650XM. but the report is it doesnt support the current IOS on the router, which is C2600-DZ-MZ-122-12C.BIN. sdm said to go the cisco.com/go/sdm and download another IOS. What IOS should I get? a basic base or one that supports encryption or what. As an aside, when I tried to download a maintenance release IOS for this router, it said I needed to have a "technical support services" agreement with Cisco. ..... But that's another story.

thanks

Re: Need correct IOS to run SDM on a 2650XM 8 years 5 months ago #33404

OK, how about this. I bought an updated flash with an updated IOS on it that should be supported by Cisco SDM. So I installed it and then at the prompt typed in the show flash command.

Is there a Cisco hardware expert who can tell me what a 2 partition flash is?

System flash directory, partition 1:
File Length Name/status
1 10770496 c2600-ds-mz.122-12c.bin
2 11768 crashinfo_20050922-135739 [deleted] [invalid checksum]
[16777216 bytes used, 0 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)


System flash directory, partition 2:
File Length Name/status
1 18213500 c2600-advsecurityk9-mz.124-9.T2.bin
[18213564 bytes used, 14816580 available, 33030144 total]
32768K bytes of processor board System flash (Read/Write)

lthe flash /2 is the new flash chip. what the flash partition 1 I don't know

thanks

Re: Need correct IOS to run SDM on a 2650XM 8 years 5 months ago #33409

  • S0lo
  • S0lo's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 1577
  • Karma: 3
  • Thank you received: 7

the flash /2 is the new flash chip. what the flash partition 1 I don't know


Isn't it your original flash, since it seams to contain the same image file you mentioned before. Or did you remove your old flash?
  • Page:
  • 1
Time to create page: 0.131 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup