Hot Downloads



The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: CSM-S Active / Standby sync

CSM-S Active / Standby sync 9 years 2 months ago #33197

  • Dove
  • Dove's Avatar Topic Author
  • Offline
  • Distinguished Member
  • Distinguished Member
  • Posts: 198
  • Karma: 2
  • Thank you received: 1

I have two 6509 switches loaded with FWSM (Bridged mode) and CSM-S. One is active and other one as standby. I have configured HSRP on vlan interface to decide active standby and Firewall priority is configured accordingly to make active and standby.

The SSL module in active switch is accessible from inside network as well as from DR 6509 switch. But the SSL module in DR switch is not accessible though they are in same VLAN as primary one.

I am not sure whether we can have CSM in this way or am I doing anything wrong?

any suggestions or advices are much appriciated.


  • Page:
  • 1
Time to create page: 0.093 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup