Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me

TOPIC: Port forwarding error!!!!!

Re: Port forwarding error!!!!! 9 years 3 months ago #33163

  • S0lo
  • S0lo's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 1577
  • Karma: 3
  • Thank you received: 7
jester, if you do port forwarding correctly, it will allow you to access it both from internet and LAN. I've done this before as many others did, there is really no difficulty in it if you set it right. Here is the exact step by step instructions for your exact model "Billion Bipac-5200"

www.portforward.com/english/routers/port.../Bipac-5200/HTTP.htm

As it is shown, you have to setup a "Virtual Server", not DMZ. Just replace port 80 with port 8000 (as you said). Do as shown and tell us what happens. Again, the IP of the DVR should remain 192.168.2.2
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx

Re: Port forwarding error!!!!! 9 years 3 months ago #33164

DMZ? Do you have the device on a seperate subnet or vlan than the rest of the network?

Also, does your Billion router have an extra inside interface on it?
Rich
Network Engineer /CCNP, CCNA-S
Tallahassee, FL

Re: Port forwarding error!!!!! 9 years 2 months ago #33170

  • jester
  • jester's Avatar Topic Author
  • Offline
  • Frequent Member
  • Frequent Member
  • Posts: 77
  • Thank you received: 1
No, the device is on the same Subnet and it is not having a separate interface ,its just a isp provided modem cum router .
I will once again try to configure the virtual server as per s0lo.
I really thank every one for their response.

Re: Port forwarding error!!!!! 9 years 2 months ago #33172

  • jester
  • jester's Avatar Topic Author
  • Offline
  • Frequent Member
  • Frequent Member
  • Posts: 77
  • Thank you received: 1
very thing went fine and i can now access the DVR ,but its throwing an error msg "device busy"

Re: Port forwarding error!!!!! 9 years 2 months ago #33176

  • S0lo
  • S0lo's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 1577
  • Karma: 3
  • Thank you received: 7
What is throwing "device busy"? The DVR? the router? And on what screen/GUI/CLI is it throwing it? Please elaborate.
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx

Re: Port forwarding error!!!!! 9 years 2 months ago #33178

  • jester
  • jester's Avatar Topic Author
  • Offline
  • Frequent Member
  • Frequent Member
  • Posts: 77
  • Thank you received: 1
I believe the error message is thrown from DVR ,i use the browser to connect to the device so its GUI screen.
Time to create page: 0.112 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup