Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: 3560 Layer 3 Question

3560 Layer 3 Question 8 years 2 months ago #26643

  • prax911
  • prax911's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
I have a 3560 Cisco Switch in layer 3 configuration port 1: 10.0.0.248/24 port 5:10.3.4.248/24 port 9:10.10.1.248/24. Port 1 is connectec to another 2950 Cisco switch which is also connected to inside interface (10.0.0.2) of a Pixz515e firewall. hosts connected on Port 5 and 9 can ping each other but cannot ping any host connected on 2950 switch. The default route of 3560 is set to 0.0.0.0 0.0.0.0 10.0.0.2. What is need to be done on 3560 so that it can ping the host connected on 2950. From 3560 i can ping any host connected on 2950 switch and also the inside interface of the firewall but why I can't ping from any host connected on port 5 and 9. Any suggestion is appreciated.
The administrator has disabled public write access.

Re: 3560 Layer 3 Question 8 years 2 months ago #26648

  • Elohim
  • Elohim's Avatar
  • Offline
  • Senior Member
  • Posts: 220
  • Karma: 0
Sounds like the hosts on the 2950 do not have a route back to 10.3.4.0/24 and 10.10.1.0/24.


I have a 3560 Cisco Switch in layer 3 configuration port 1: 10.0.0.248/24 port 5:10.3.4.248/24 port 9:10.10.1.248/24. Port 1 is connectec to another 2950 Cisco switch which is also connected to inside interface (10.0.0.2) of a Pixz515e firewall. hosts connected on Port 5 and 9 can ping each other but cannot ping any host connected on 2950 switch. The default route of 3560 is set to 0.0.0.0 0.0.0.0 10.0.0.2. What is need to be done on 3560 so that it can ping the host connected on 2950. From 3560 i can ping any host connected on 2950 switch and also the inside interface of the firewall but why I can't ping from any host connected on port 5 and 9. Any suggestion is appreciated.
The administrator has disabled public write access.
Time to create page: 0.072 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup