Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: range in DHCP

range in DHCP 10 years 1 month ago #26488

  • omer84
  • omer84's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Karma: 1
  • Thank you received: 0
hi guyz,

I have the following case, i need to enable DHCP on a cisco router with the following ip range,
192.168.1.100 - (starting)
192.168.1.200 - (end)

check the folowing codes.

ip dhcp pool abc
network 192.168.1.100
default gateway 192.168.1.100
import all
lease time infinte


i knw i am wrong but where,

Re: range in DHCP 10 years 1 month ago #26489

ip dhcp pool abc
network 192.168.1.0/24
default gateway 192.168.1.100
lease time infinte <-- sure about this?

ip dhcp excluded-address 192.168.1.1 192.168.1.100
ip dhcp excluded-address 192.168.1.201 192.168.1.255

not tested, just test and see if it is what you need

Re: range in DHCP 10 years 1 month ago #26493

  • omer84
  • omer84's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Karma: 1
  • Thank you received: 0
It works thx,, but is there any other way that all the commands be inside the dhcp pool,, i mean not excluding the ips,

Re: range in DHCP 10 years 1 week ago #26706

Your default gateway is not normally set up the way up there. Try just changing the DHCP range to star at 110 and see if the Default Gateway then changes to 110 after a restart, this will tell us if its your error or the routers/firewall.
  • Page:
  • 1
Time to create page: 0.145 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup